The following instructions outline the setup process for Stunnel + OpenVPN connections on Ubuntu 16.04:

1. Open the Terminal

2. To install the OpenVPN software on your system. Type "sudo apt-get update". 


Enter your password and press "Enter". Wait about 1-5 minutes, depending on speed of your network

Type "sudo apt-get install network-manager-openvpn-gnome”. 

Type “Y” and press "Enter"

3. To install Stunnel type "sudo apt-get install stunnel4"

4. Download Stunnel configuration files here

5. Right-click the downloaded file and select "Extract here"

6. Run Stunnel via Terminal by typing: 

    "sudo stunnel4 /path_to_file/server.conf",  

    where path_to_file is path to your stunnel configuration file 

    and server.conf  is the server configuration file you wish to connect to. 

    No message will be displayed.

IMPORTANT NOTE: Names with spaces should be included into single quotes ' '

7. To run OpenVPN type: 

 "sudo openvpn /path_to_file/localhost.ovpn",  


   where path_to_file is path to localhost.ovpn file,


   located inside files you extracted in step 5


   Enter Auth Username: Easy-Hide-IP user name


   Enter Auth Password: Easy-Hide-IP password

8. If you have entered the correct login information, you will see  message 

 "Initialization sequence completed"


 All of your online activities are now 100% secure and anonymous while  connected to Easy-Hide-IP.


 If you have any questions, or experience any issues while installing and setting up your Ubuntu device


 to connect to the Easy-Hide-IP VPN servers - please contact our  Support Team anytime.